1. O

    Spotlight switch wiring gauge query

    Hi, Im changing out an ugly switch connected to my spotlights, replacing it with an OEM style push switch but I have one question regarding the wiring. The wiring coming from the new OEM style switch is much thinner than the wiring in the harness. Is this safe? I don’t want to burn down my car...
  2. D

    Fridge/oven setup?

    Fairly new to 12v setups but just trying to get my head around some things; 1-Fridge wiring? Will probably be getting the bushman 85l upright, but wanting to know how to wire it in. Do I just come straight off the fuse block? And/or use anderson-if so what amp rating and cable gauge needed...
  3. L

    Fj73 3f carby swap

    So i have a 3f carby and im wanting to go to diesel . Any got any idea what engines r compatible with the gear box? cheers
  4. REViXiSSE

    Mazda Tribute Dual Battery w/ Solar Project

    Hi All, I am in the middle of rewiring up an older 2004 Mazda Tribute to take out camping that will run as a somewhat sustainable power hub for a bunch of 12v accessories, and I was hoping to pick the brains of those with more experience in this area. I have attached a diagram of my current...
  5. Waswell

    Headlight Upgrade - Older Vehicle

    I'm looking to get a little extra light out of the headlights on my 2002 Landcruiser HZJ105. Not too worried about hi-beam, as they aren't all too bad and i have driving lights for situations where hi-beam isn't enough. I'm not overly keen on the idea of shifting to LED's entirely. apart from...
  6. W

    Dual Battery Wiring

    Hi Guys, After becoming interested in off the grid camping I began doing a lot of research into dual battery systems and decided to have a go myself. I came up with the setup you can see in the attachment but i am having some issues getting it to work properly. I want the battery protector to...
  7. Drifta032

    Ranger connecting to Drifta DOT batteries etc

    Hi everyone. First timer on here - just picked up Drifta DOT second hand and working out how I get my Ranger setup to have a good camping battery setup for both car and trailer. No setup in car at all - blank canvas. Attached is a picture of what is the go in the trailer - it has a 7pin and...

    Vdj79 suction control valve ( scv) issue

    Hi guys I've taken out my suction control valve to give it a clean because my motor was running rough now I've put it back together the engine won't start up , it's not showing any power going to the suction control valve when the ignition is on, Does anyone have a suction control valve...
  9. L

    By passing high beam connection

    Hi guys, I have two little work led lights I’m connecting up to my car. I’m using a wiring harness but I want to be able to have them turn on and off without my high beams been on. Can anyone help me with a way to bypass the high beam connector? I need them to run without high beams been on...
  10. 4x4Dog

    Colorado / Trailblazer roof light bar

    How is everyone getting the wiring up to roof mounted lights on their RG Col? I'm thinking through the back of the bonnet and up the windscreen side channel but havent seen any examples yet. Mine is 2017 Trailblazer, i want to put a light bar at the front of my rhino platform. Cheers