Change background image

What Did You Do To Your 4X4 This Week? Include photos, if possible!

Discussion in 'General 4x4 Discussion' started by CHUAH1, Jul 31, 2011.

  1. jack doff

    jack doff New Member

    Love the pic grey ghost.

    I spent the last two days cleaning sand and salt out of my 60 after spendin the last two weeks catchin mud crabs up in Bowen. Bloody nice place, warm too, but the bleedin wind never lets up. No wonder the locals call it blowin Bowen. Past some nice lookin camp spots right on the beach on the way back down. Clairview I think it was.
    Goin back up in a couple of weeks for the fishin classic. Might try to go all the way to the top while I'm there.
    Anyone got any tips for the tracks up that way?
    I've got a 60 with 12ht, 12lb boost, 3", snorkel and 33" stt's. 2" lift. Ive not got a winch tho. Am I gunna need one this time of year?
    All input welcome.
  2. Chewy

    Chewy New Member

    Last week - got new tyres fitted
    This week - full service + washed it
    Next week - finish my drawers
    Week after - will be in Oodnadatta! :D
  3. madgq

    madgq Member

    put my new lightbar on, upgraded from a 22" to 52"

  4. Quozie

    Quozie Member

    Just installed my early Father's Day pressie....................... one pair of Light Force 240 Blitz. SWEET

    Attached Files:

    Last edited: Aug 28, 2011
  5. frosty

    frosty Well-Known Member

    We need picy's at night with em all lit up!!!!!:cool:
  6. Pure Yobbo

    Pure Yobbo Moderator

    Is that the crappa sitting in the middle of the roof rack?
  7. jack doff

    jack doff New Member

    Odd place to take a dump
  8. profoto

    profoto New Member

    I washed the Navara, it's metallic Green, I had almost forgotten, the joys of travelling through cow crap and dirt roads every day.
  9. Quozie

    Quozie Member

    LMAO...sure is, redy to leave on Thursday
  10. mallebull

    mallebull New Member

    Got a set of Black Widow Draws Fitted:D

  11. blaknav

    blaknav Member

    rolled under it today and changed the gearbox and rear diff oils makes a huge difference :D rear lsd feels heaps tighter but found some good chunks on the magnet in the gearbox:( ahhwell lucky ive got a spare.
    also getting the extractors fitted that i got off my parts car on friday...sweet:) already for camping this weekend
    Last edited: Aug 31, 2011
  12. Traveller

    Traveller 4x4 Earth Contributer

    Pulled apart half the drawer system looking for a leak! Found the bugger, a big bung plug had fallen in:(. Painted the top shelf and divider I had a mate make up a few years ago, only put it in to test fit originally;

    Finally got around to getting Matt at GOR to replace the clutch too:eek:. 421,00 kays isn't too bad I guess! Might have got a few more though.:D
    Thanks Matt,
    great job as usual, and Shelley is pretty happy with you for fixing her car too mate:):)
  13. Walkabout

    Walkabout Moderator

    Nice custom headrests Traveller ;) no expense spared :rolleyes::)
  14. Zukiman

    Zukiman Member

    Aldi Winch. Purchased and installed in a couple of hours. works great, especially the wireless.
  15. havok011101

    havok011101 New Member

    This week I got my brake calipers reco'ed and put them back in tonight (was meant to be a pad change, but 7 of the pistons were seized!)

    I also sprayed my rusty/white rims Killrust Matt Black, and did a quick job spraying my bullbar and brush bars/steps.

    No pics because I got the shit's with bleeding the brakes and haven't put the front wheels on yet.
  16. Out on Patrol

    Out on Patrol New Member

    Monday night I finished replacing all the seals on the swivel housing, fitted new swivel housing/king pin bearings, new wheel bearings, inner axle seals, cleaned and repacked both CV's, right for another 20 years now. What a mongrel of a job!

    Tonight I fitted an ARB compressor under the passenger seat. My Fathers day present I bought myself at the 4wd show last weekend.

    Last edited: Sep 3, 2011
  17. Grumpy

    Grumpy Moderator

    Just a question about the compressor under the seat, have you considered how hot they get.
  18. Out on Patrol

    Out on Patrol New Member

    Hi, yeah I thought of that and this arvo when the better half gets back I am going to make up a bracket to mount two small 12v fans I removed from a broken TV to help cool it. just don't know whether to run a seperate switch or just run them off the compressor switch so they are on whenever the comp is running.

  19. shinysideUP

    shinysideUP 4x4 Earth Contributer

    ARB fitted mine there without even asking me so must be the norm. You'd think they would know if there was a risk or not.
  20. Pure Yobbo

    Pure Yobbo Moderator

    I finally finished fitting new wheel bearings to my camper after our recent cape york trip. Put the camper back away and prepared the shed for the next mission


    I smashed a CV a few months ago so that needs fixing the king pin bearings are all buggered so I figured I would start from scratch and purchased a second hand housing and then sent it down to Superior to get strengthened up now I will start to fit it up.

Share This Page