With Canon there's some add on software called Magic Lantern which has some very useful features such as Take a photo every x (basically whatever you want) so for the night time time lapse I set the camera up on a hill with a 30 second exposure and told it to take a picture every 30 seconds about 2 hours later that's what I got.Shaggy and muzza ... bloody hell lads, nice!
Muzza, may i ask what lens, ISO and body you're using on your stills? I find i can't get any more stretch out of my kit currently , F3.5, ISO3200 ..30 seconds... but tends to get muddy. Any longer than 30s of course earths rotation starts blurring them.
Shaggy, what are you using for the time lapses? I did this on a go pro (second half is night time, excuse the start) ;
By using the right settings and planning and being patienthow do you get such brilliant photography of the night sky. Its pretty........
Close, for great Milky way shots use a large aperture of around 2/2.8 allows more light in. Tripod is a must, 20 - 30 sec exposure depending on sensor size, I do 20 sec to reduce star movement, manual WB especially if you are blending as it makes it easier, manual focus, ISO 1600 (f/2.8) when moon is 35% or greater, ISO 3200 (f/2.8) when new moon or less than 35%. This is depending on how good your camera handles these ISO's, also remember to turn off the NR feature in your camera otherwise it will be 20 sec exposure - 20 sec NR = 40sec etc. Hope this helps.Put the camera into manual mode and on a tripod with a remote shutter release so the camera doesnt move and blur the image and set the shutter into bulb mode and hold the shutter open for a good length of time. you would also want to put the iso to the lowest your camera will set to and an aperture of probably f8 - f11. for astro shots of the sky you would want the iso up around 1250 and an aperture of f2.8 at about a 30sec exposure.