Nissan Patrol GU III 2004

Reddave

Member
Nissan Patrol GU III, 2004


Good Points
Its a Nissan
Its Diesel
Was immaculately maintained, full service history
Aircon is very cold!!

Bad Points
It has the 3.0L, Time will tell :)

What mods have you done?
285/75R16 Cooper All Terrains (would never buy these) Crap in wet
Dual Batterys, Reverse Sensors, Bonnet, Headlight protectors, Genuine Nissan Winch Bar and IPF Spotties, Window Tint

Since Buying:
Genuine Nissan Snorkel
Boost and Pyro Gauges
Provent Catch Can
Turbo Timer
Full set of mats
Goodyear Wrangler MT/R 285/75R16
Uniden 7760NB UHF
3" Dobinson Coils
Roadsafe adjustable panhards front and rear
Patroldocta Draglink and Tierod
Extended Brakelines
ARB on board air compressor
Front and Rear ARB air lockers
Brawn 9500lb winch
Narva 225 spotties
Pioneer Entertainment system

And I'm sure there is a lot more that I cant remember :D

What mods are on the list to do?
Long Range Tanks
Engine conversion
Dual cab chop (Maybe)

Why did you buy this vehicle?
I bought this to tour, and Mel wanted something nicer to cart the kids around

How often do you go offroad?
As often as possible, but around once a month

What will your next vehicle be?
This but newer

The day I bought it home:
309499_IMG_0546.jpg


First trip away:
711255_IMG_0592.jpg


Now:
50B0E5F5-B72B-4A5C-9825-36EC51BB6E81_zpsdseg6bl9.jpg
 

Attachments

  • newgu.jpg
    newgu.jpg
    37.6 KB · Views: 248
  • kurthkiln.jpg
    kurthkiln.jpg
    44.9 KB · Views: 260
Last edited:

Pure Yobbo

Moderator
Looks like a nice Rig, The 3lt's of that era are pretty good. My old man tows a pretty big van around with his no probs at all. One of the guys we went to the cape with had one - never missed a beat well it did but that was driver error :rolleyes:

Is the HID on the low beam as well? if so can I ask why?

Cheers
 

Reddave

Member
Got my new rubber fitted today, Mickey Thompson MTZ 285/75 16, now the coopers can go on my camper and I at least have matching tyre sizes!!!


Yes, the HID is on low beam as well, the kit was originally in my GQ, Mel can't see all that well when it gets dark!!! I try and drive as much as I can but sometimes it's better that she drives
 
Last edited:

Reddave

Member
Fixed an annoying rattle today, was only happening when I turned, thought I was going to have to find the money real quick for my lift.....

But just turned out to be the control unit for my turbo timer :eek:

In the last month have tidied up my rear power outlets, merit plug, 12v plug and engel plug in the back, single 12v in the rear of the console.
Fitted a Uniden 7760nb UHF, All the controls are in the mic, and fitted an antenna to the inside of the windscreen, works great in convoy!!!

Still have quite a to do list, even more so after Wandin last weekend!!
 

Reddave

Member
Just finished fitting diff breathers, front and rear, breathers mounted next to my wiper motor.

Easy job to do with a hoist, would have been easier to do on Friday before heading out to warburton and covering the underside in mud:D
 

Big Matt

Active Member
Just finished fitting diff breathers, front and rear, breathers mounted next to my wiper motor.

Easy job to do with a hoist, would have been easier to do on Friday before heading out to warburton and covering the underside in mud:D

Yeah but ya know that was fun, breathers or not :)
 

Reddave

Member
Drawers won't be for a while yet, lift and winch are next on the cards, and if I get enough tax back, maybe a front locker.....
 

Big Matt

Active Member
Yeah good call, lockers are sweet :-D i love mine

I dont remember but do you have sliders ? A winch is a must have, i really need to put mine back together
 

Reddave

Member
Yeah good call, lockers are sweet :-D i love mine

I dont remember but do you have sliders ? A winch is a must have, i really need to put mine back together

Sliders are getting made as far as I know, a mate of a mate is making them up in his spare time, I want them to come out a little bit further so Mel can use them as a sidestep (short arse :)) and possibly have them come up into brush bars, but I need to decide wether I will be keeping the Nissan steel bar or going to a tube bar
 

Reddave

Member
Just ordered my suspension, should have it by the end of the week!!!:D

It's meant to give me anywhere between 50-75mm, but is sold as a 2 inch lift. I will take measurements before and after, and also in a couple of months.

Ended up ordering King Springs and the new KYB Scorched Shocks, have heard good things about the Kings, the KYB's are meant to be very similar to Konis...:rolleyes:

All going to plan I should have it in and fitted this weekend, then send it off to the aligners and found out if I need to do any caster correction :eek:
 

Reddave

Member
It's a personal thing but I like the Nissan bar myself

I like the Nissan bar as well, Mel drives it everyday and since wandin, she has seen and likes the XROX tube bar, just don't know if I could part with that amount of money just for cosmetic reasons :)
 

Reddave

Member
Shocks turned up today, but doesn't look like my springs will be here before the weekend :(
Hopefully tomorrow they turn up

Ordered a "good" pyro and boost gauge, autometer, maybe I might actually be able to read it, instead of the cheapo gauges I have now which I almost have to stop what I am doing just to read them
 

Reddave

Member
Springs turned up today, cleared the workshop, ready to spend the morning fitting the new springs and shocks.....

Stay tuned for before and after measurements and photos
 

Pure Yobbo

Moderator
I like the Nissan bar as well, Mel drives it everyday and since wandin, she has seen and likes the XROX tube bar, just don't know if I could part with that amount of money just for cosmetic reasons :)

Watch those bars mate - havn't got a good rap up here.p Does yours have air bags? you need to make sure the bar is air bag compliant if you have them
 

Reddave

Member
Watch those bars mate - havn't got a good rap up here.p Does yours have air bags? you need to make sure the bar is air bag compliant if you have them
Thanks mate, yes has airbags, so yes, does need to be compliant.

Even if I do end up with a tube style bar, it's still a long way off, lots more stuff takes priority over the bar when I have one that will take a winch :)
 

Pure Yobbo

Moderator
Thanks mate, yes has airbags, so yes, does need to be compliant.

Even if I do end up with a tube style bar, it's still a long way off, lots more stuff takes priority over the bar when I have one that will take a winch :)

I give you the bum steer - are you talking about the one sold by Opposite Lock if so they arn't a bad bar there is a guy up here called XRO I confused the bars with his

I just put an Off Road Division tube bar on my GQ same price as the XROX bar but fully weleded not bolted togethor - bloody good bar
 

Reddave

Member
Thanks mate, I thought the XROX was airbag compliant!!!

The XRO, that's another story lol

Anyway got my lift in this morning, raised the car 55mm on passenger side as 60mm on drivers side, that's with an empty sub tank, once that's full should level out

Measurements before were: L/F 745mm R/F 760mm and L/R 755mm R/R 775mm
Measurements after were: L/F 800mm R/F 820mm and L/R 810mm and R/R 835mm

Pics to follow :)
 
Top