Jerry Cans, Steel or Plastic?

Hey guys!

I want to buy a couple of jerry cans to carry petrol for my rally cars and also for going on longer trips in the truck.
There are a lot of plastic versions available but I'm not sure how long they would last if left on the roof racks (on a trip)

Would I be better off paying more for a couple of steel units?
They seem to be around double the price of plastic!

Any experiences with both?
I have seen trucks with jerry cans stored on the roof rack on their side, I would have thought they would have to be upright!
Ta
 

redandy3575

Well-Known Member
Go the steel. Far more safer & secure, plus they don't bulge or vent like the plastic ones do.

Not that i recommend smoking beside one!!
 

frosty

4x4 Earth Contributer
Don't buy new ones. They are rubbish and will rust out quickly and no strength. Buy the old used military ones. A few bucks dearer, but I've had 3 for 20 years. And they are still in the same condition.
 

frosty

4x4 Earth Contributer
Disposals. Camping shops. Can't miss em. They look well and truly used. Anaconda have them, but are $$$$
 

bluehilux

Banned
Glad i read this as i was going to go look at those platsic ones But i forgot i had this under the house :D
 

Attachments

  • DSCN9878.JPG
    DSCN9878.JPG
    246.3 KB · Views: 247

FODFA

Active Member
Nothing wrong with the plastic ones, I have one good steel Jerry I use for Shellite and a few other plastic ones I use for lawn mower fuel and star diesel when traveling remote. I carried 2 plastic jerries across Madigans line last year inside the Prado, not a drop spilled.

Cheers Andrew
 

TheLocksmith

New Member
I heard the metal ones crack on the seams. I went plastic and never had a drama. Used plastic ones for the mower and chainsaw. Did have the metal ones but they gather dirt/dust on top.
 

Les PK Ranger

4x4 Earth Contributer
I have plastic ones too, the tall 20lt and the squat 20lt.
As per pics below, the squats are more stable, but the taller ones have the little air bleed valve that makes dispensing from them a bit faster.
 

Attachments

  • jerry2.jpg
    jerry2.jpg
    3.8 KB · Views: 228
  • jerry1.jpeg
    jerry1.jpeg
    3.1 KB · Views: 252

80lover96gxl

Moderator
Yep good quality plastic ones are fine, got 7 in total and never had a problem .
Wouldn't mind a couple of those squat ones like yours Les.

Sent from my GT-I9505 using Tapatalk 2
 

Les PK Ranger

4x4 Earth Contributer
I have 3 taller ones, and 2 squat type.
One of the taller ones has a dodgy small air vent cap, can overturn / overtighten it and it's loose, so don't really use that one. Might try putting a 3mm rubber gasket in the top of that to help seal before it overtightens.

Can't for the life of me remember where I got the squat ones from.
Don't think Supercheap have the squat ones.
I 'think' Woolies Petrol stores sometimes have them (and the taller type).
When I see them around again, I'll let you know here in the thread and PM.

The other thing I like about both these type is the filler is held inside the container, away from dust etc.
The only bad thing about that is getting a bit of diesel on hands or gloves when fitting the nozzle in the black retainer ring to screw onto the container.
 

cloughcarib

Well-Known Member
Never had an isssue with my plastic cans, got one that's about 9 yrs old now, just have to buy new seals every three or four years. Also have a steel can I do like, but having no breather it takes flippin' ages to empty.
 

80lover96gxl

Moderator
I have 3 taller ones, and 2 squat type.
One of the taller ones has a dodgy small air vent cap, can overturn / overtighten it and it's loose, so don't really use that one. Might try putting a 3mm rubber gasket in the top of that to help seal before it overtightens.

Can't for the life of me remember where I got the squat ones from.
Don't think Supercheap have the squat ones.
I 'think' Woolies Petrol stores sometimes have them (and the taller type).
When I see them around again, I'll let you know here in the thread and PM.

The other thing I like about both these type is the filler is held inside the container, away from dust etc.
The only bad thing about that is getting a bit of diesel on hands or gloves when fitting the nozzle in the black retainer ring to screw onto the container.

Yeah cool Les cheers mate.

Sent from my GT-I9505 using Tapatalk 2
 

Les PK Ranger

4x4 Earth Contributer
Don't think so blue, pretty sure they have tall ones, and with the nozzle on the outside, prone to dust etc.

I reckon it might be Woolies petrol stations over here, Safeway in some states I think ? . . .
When I see them again, I'll post up where.
 
Top