exhausted

80lover96gxl

Moderator
gday everyone,the exhaust on my 4.5 ltr 80series needs replacing as its the original and just about stuffed,its a standard engine with a snorkel.just want to free it up abit without sacrificing power and in the hope of mabey gaining abit of power and a little better fuel economy.needs to be replaced from head to tailpipe,any advise would be greatly appriecated,cheers 80 lover.
 

Vegetoast

Active Member
I'm in the same boat! My mechanic suggested I get extractors, 3inch system and juice it up a bit, not sure about a muffler. Mean while for the last 2 years I've been fillin holes and adding small braces with a cheap gasless mig. It can wait till it falls out..lol
 

PSI 80

New Member
Hey guys, my 4.5 80 was running a set of genie extractors with a mercury (out of the box) 2.5 inch mandrel system and it was a good combo. Redline exhausts also make one to suit.
 

duncan

New Member
i have always been told going bigger is not always better, they design the exhaust system the way it is for a reason, extractors are good, pity they don't make them for turbo's.

just as a side note, in NSW it is illegal to modify the exhaust on any vehicle from the manifold back, that means what it came with is what it has to have, but in saying that most mechanics don't give a shit what you put on them so long as they are not noisy and have at least one muffler, but if a man or woman in blue wants to screw you over they will, so just be careful of what you do.
 

Jarh73

New Member
i have always been told going bigger is not always better, they design the exhaust system the way it is for a reason, extractors are good, pity they don't make them for turbo's.

I might have misunderstood your comment regarding extractors for a turbo?

There is no such thing because there is no need with a turbo. You want the exhaust as hot as possible before the turbo so you need the turbo as close to the engine as possible.

After the turbo you just need the biggest pipe you can fit.

Cheers

Justin
 
Top