Search results

Are we allowed to identify the targets?

I think XTRM87 sent you lot on a wild goose chase

Generally a dead short would result in a lot higher current and massive voltage drop to the point where the LEDs wouldn't light up.

Smitty Your testing setup sounds right. Did you happen to measure volts while running the light? As voltage drops current rises. Are you sure you read the rating for the correct light? 12.7A sounds like a reasonable current draw depending on size of the light. It would be worth checking. By...

Mods and rockers work for you?

Thanks Andrew. Sorry bout the slow reply. Thinking I might bite the bullet and upgrade the motor. Try to get it waterproof.

Thanks Barra. I have looked into upgrading the motor. Hoping not to spend the dollars at the moment if I can. Bought an M12000 for $100 that came off a service truck. Bugger all use but the mud had caked on around the end cap and corroded it away. All the internals are like new. It also seems a...

looking for an end cap for a warn 4.6hp motor or a dead motor. Found mine is corroded and cracked. Preferably Newcastle or central coast Thanks

The 4wd supacentre ones make a good base if they fit the bill. Shortened one of the single drawers for the back of my landcruiser 105 so i could still use the anchor point. Have attached a drop down fridge slide to one of them. Simple design. Seem to be holding up well so far.

Don't be so scared of a 16 year old. If she wasn't right you wouldn't get so upset.

Have a look on YouTube at a guy called Tyler Thompson. He did a series of 5 videos on high country. A lot of the tracks he did were fairly well maintained.

Wow, could have easily drowned. Would be good to know what went wrong.

Do you have an intercooler fitted already? Is front or top mount? Have you upgraded your exhaust and inlet? A good snorkel will make a big difference

Look at where you are going to mount the dc dc. If you place it under the bonnet it will get hot, which will eventually damage the dc dc. Electrolytic caps don't like heat and degrade very quickly The only one I could find that was rated to be mounted behind the grill was the redarc. This is a...

Hmmmm I'll have a look Thanks

Bugger

I couldn't get the code to work on that winch. Not sure if I missed something?

Common sense is a bit of a loose term

Probably already been asked. What did you paint the rear bar and sliders with? Finish looks really awesome.

Time to let out your inner phobias.