Search results

Thanks mate, yeah they look good, Ive found a heavy duty AISIN on that suits my car so considering that too

Hi all, looking at replacing my clutch, I'm after the most heavy duty clutch I can get without sacrificing basic clutch operation, that's capable of heavy off-road towing (To suit a 1998 Hilux 4x4) So what do I look for when buying a clutch, money isn't an issue (if its under $600) Brands/...

Can't beat that

Hi all, I was just curious what anti theft devices you blokes have used or are using, I've spent a bit on the rig and it would break my heart if it was stolen. Interested in any electrical or mechanical mods you've made to keep the grubs off your car.

Thanks for the replies lads, The engine runs great, it was only on the incline it started to cause problems no clue on the condition of the pump so I'll check someday, I did the fuel filter about 10 000ks ago so I'm sure it's alright All I can think is that on the incline the oil in the...

Hey mate, I live down here, Some good tracks are out at East Lynee around shallow crossing, Batemans bay to mogo powerline tracks Heaps, just have a drive around and you'll find many

G'day lads, I've been wondering, the last trip I did I was making my way up a real bad incline, I had to winch so hence the engine was idling on the hill for a bit, after a bit I realised my oil level/ pressure light was on, no overheating. The engine had also started to idle very low and...

Sounds difficult

That's what I figured, and yea sill protection bars, scrub bars, brush bars, side bars, too many names I was hoping someone with them fitted had some photos of how they did it so I've got a basis to work on, Thanks mate!

Try a wreckers maybe or wait until one pops up, the only other thing I'd think of would be to buy a new fog light that is the tiniest bit larger and cut a new surround into the bar

Good luck with it mate!, Good car

G'day, Ive got a pair of scrub bars without any mounts or locations to mount. Has anyone got some photos of their scrub bar mounts on the chassis? It would be greatly appreciated!

Hi all, Ive been struggling to find a set of scrub bars for my 98 Hilux, well I've found some from a 91 Hilux, I was wondering if the chassis in the different series would be similar to work with, considering the 91/97 and 98/04 Hilux are built differently

Yep you're not wrong, misread the 167!, In that case Im only familiar with an 03 5vz, and it has a lot more power than the 3rz, unfortunately that's all I know about it !

Hey mate, I bought the same Hilux about a year and a half ago, I paid $4800 Petrol 2.7l dual cab 4x4 with 250 000ks It has been an awesome car since I've had it and haven't had any major issues at all, came with a canopy knudge bar etc, in great condition.

Haha, not sure I wanna be in the Hilux club now, I figured it had something to do with the seals/ bearings. Thanks for the quick reply mate

G'day, so after I long drive with steep ascents and descents I thought I could hear a very faint clunk in 1st at about 700 rpm, anyway had a look under the car and found the rear drivers side tyre covered in oil on the inside. Wheel off and found my rear drum brake also covered in oil, with the...

G'day, I would recommend to stick with a 15" or 16" rim, The smaller your rims are means youll have a greater sidewall and when running a lower PSI have a larger tyre footprint giving you better traction and a greater resistance to punctures. IMO I would stick with steel rims such a...

Gday, I’ve had no luck at all finding side rails/ brush bars/ scrub bars to suit a single cab 03 Hilux, let alone a space cab. Does anyone have an idea where I should look? Cheers

Mogood lookout, batemans bay, NSW south coast